SHOTBLASTERS
Effective cleaning, profiling, and removal of hard coatings from concrete or steel surfaces.
PERFECT PROFILES & HIGHER
PRODUCTION RATES
WHAT TYPE OF RIDE ON FLOOR SCRAPER IS RIGHT FOR YOUR BUSINESS?
Shot Blasting is a process that removes old coatings from concrete or steel surfaces and prepares them for new coatings to be put down. Shot Blasting is one of the main types of Surface Preparation. Surface Preparation is the process of texturing a surface so that a coating or topping adheres properly.
Read our Full Blog – What is Shot Blasting for more details.
Enclosed Shot Blasting is a dust free process when used with a proper vacuum system. This helps remove old coatings and the prep the surface (Concrete or Steel) in one pass. You are able to achieve different surface profiles by different sizes of shot , as well as adjusting your speed.
WHY SHOT BLASTING?
Like most equipment, Shot Blasting has certain situations where it will work best. Shot Blasting is an extremely effective tool for removing old coatings & prepping the floor for new coatings. The main benefits of Shot Blasting are:
- High Production
- Very clean profiles
- Dust Free
- Gets into the “hills & valleys” unlike other equipment
- Easy to use
- Low Consumable Cost
Shot Blasting is capable of being effective in many Surface Preparation situations. One area that Shot Blasting may not be most effective is when there is an elastic or rubber-like coating that needs to be removed. In most cases, Shot Blasters are one of the best tools that a Surface Prep Contractor can use to achieve effective concrete and steel preparation.
SHOT BLASTING VS. GRINDING
The conversation around Shot Blasting and Grinding has been around for some time. Both are acceptable forms of Surface Preparation and coating removal. While Shot Blasting has some advantages over grinding, there are certain situations that may make sense over the other. Many coatings manufacturers spec Shot Blasting as the preferred method to prep the concrete or steel before applying.
The short answer to the question about Shot Blasting vs. Grinding is that it depends on the situation.
If you are removing coatings like epoxy paint and other hard toppings, Shot Blasting is probably the best option. If you are removing rubbery coatings or need a very light surface profile, a concrete grinder may be better.
For more detailed information on this topic, check out our blog: Enclosed Shot Blasting vs. Concrete Grinding
WHY USE OUR SHOT BLASTERS?
There are a number of companies that produce Shotblasting machines. Bartell Global has been manufacturing our line of SPE Shotblasters since the 1970’s.
Bartell Global’s line of SPE Shotblasters are:
- Highly Productive
- High Quality (Fabricated in the UK)
- Very Easy to Use
- Delivers Aggressive Profiling
These are just some of the reasons why SPE Shot Blasters are the choice for many world-class Surface Prep contractors.
To see more reason why SPE Shot Blasters are what you should be using, click here
DISASSEMBLE FOR SMALL AREAS
Some units can be broken down to fit through man-holes for applications like oil tank prep
HIGH QUALITY BUILD
Built with high quality manganese steel and other components, by seasoned fabricators
UP TO 20″ BLASTING WIDTH
Shot blasters that range from 9″ – 20″ depending on your production needs
COMMON ELECTRICAL PARTS
No need to order over-priced electrical parts. Pick up what your blaster needs wherever you are